CE Standard Glazed Tile Roll Forming Line
Product Description
TF Glazed Tile Roll Forming Line,
hot sale full automatic glazed tile forming machine making construction roof sheet
MATERIAL:
(1) Coil Width: 1000 mm~1250mm
(2) Suitable Coil Thickness: 0.3mm - 0.6mm
(3) Suitable Raw Materials: Pre-painted Coil;
(4) Yield bearing stress: 235MPa
MACHINE COMPONENTS:
(1) Hydraulic Un-coiler: 1 set
(2) Roll-Forming M/C: 1 set
(3) Hydraulic Pressing Die/Cutting M/C: 1 set
(4) PLC Control System: 1 set
(5) Product Rack (un-powered): 1 set
Specification:
Main Technicial Parameter:
| 1 | Inner diameter of manual decoiler | 500mm |
| 2 | Outer diameter of manual decoiler | 1200mm |
| 3 | Weight capacity of manual decoiler | 5T |
| 4 | Appearance Size | 8500mm*1550mm*1300mm |
| 5 | Raw Material | colored steel or galvanized steel |
| 6 | Roller material | high grade 45# forged steel,polished,heated,quenched |
| 7 | Blade Material | CR12 with polished |
| 8 | Chrome Coating | coated with 0.05mm hard chrome |
| 9 | Control System | PLC control |
| 11 | Hydraulic Power | 7.5 KW |
| 12 | Roller station | 13 rollers |
| 13 | Material of chain | high grade 45# steel:polished,heated,quenched HRC 45-50 |
| 14 | Speed of Product | 0-12m/min |
| 15 | Thickness range | 0.2-0.8mm |
| 16 | Type of cutting | hydraulic cutting |
| 17 | Coil Width | 1250mm |
| 18 | Cover Width | 1100mm |
| 19 | Material of rack | complete welded structure of A3 steel plate |
| 20 | Machine frame stand | welded with 300H-steel |
| 21 | Type of forming machine | single station with chain transmission |
| 22 | Thickness of side-wall | 16mm |
| 23 | Shaft Diameter | 75mm |
| 24 | Weight | about 4 T |
| 25 | Voltage | 380V 50HZ 3Phases( or as your local requirement) |
| 26 | Electrical control | PLC frequency control system |
Product Categories : Steel Structure Roll Forming Line > Glazed Tile Roll Forming Line